| MALLEABLE IRON THREADED FITTINGS |
|
Standard Class 150 Specifications: ANSI B1.20.1, Threads, B 16.3, Dimensions, Pressure Rating
ASTM A197, Material. A153, Galvanizing
Federal Spec: WWP 521
Pressure Ratings:
150 psig - Saturated Stream
300 psig - At 150 Degrees W. O. G. U.L.C. and U.L. listed where applicable, FM approved.
|
|
Extra Heavy Class 300 Specifications:
ANSI B1.20.1, Threads, B16.3, Dimensions, Pressure Rating
ASTM A197, Material A153, Galvanizing
Pressure Ratings:
300 psig - Saturated Stream
¼ - 1 - 2000 psig - At 150 Degrees W.O.G.
1 ¼ - 2 - 1500 psig - At 150 Degrees W.O.G.
2 ½ - 3 - 1000 psig - At 150 Degrees W.O.G. U.L.C. and U.L. listed where applicable, FM approved
|
|
Union Specifications: (Brass to Brass, Brass to Iron, Iron to Iron, Gasket Type, Dielectric Iron to Brass)
ANSI B1.20.1, Threads, B16.39, Dimensions, Pressure Rating
ASTM A197, Material. A153, Galvanizing
Federal Spec: WW-U-531
Pressure Ratings:
Class 150:
150 psig - Saturated Stream
300 psig - At 150 Degrees W.O.G.
Class 250:
250 psig - Saturated Stream
500 psig - At 150 Degrees W.O.G.
Class 300:
300 psig - Saturated Stream
600 psig - At 150 Degrees W.O.G. U.L.C. and U.L. listed where applicable, FM approved
|
|
Top Beam & C-Clamp Specifications: Malleable Iron
ASTM A197, Material. A153, Galvanizing
3/81/2 rod size
Supplied with set screw and lock nut
Clamp Range:
Small mouth Beam Clamp & C-Clamp - ¾
Large mouth Beam Clamp & C-Clamp - 1 ¼ U.L.C. and U.L. listed where applicable, FM approved
|
| CAST IRON THREADED FITTINGS |
|
Standard Class 125 Specifications: ANSI B1.20.1, Threads, B 16.4, Dimensions, Pressure Rating
ASTM A126, Material. A153, Galvanizing
Federal Spec: WWP 521
Pressure Ratings:
125 psig - Saturated Stream
175 psig - At 150 Degrees W. O. G.
Federal Spec: WW-P-501
U.L.C. and U.L. Listed Where Applicable
FM Approved Where Applicable
|
|
Plug and Bushing Specifications: ANSI B1.20.1, Threads, B16.14, Dimensions, Pressure Rating
ASTM A197 (Malleable), A126 (Cast), Material A153, Galvanizing
Pressure Ratings:
Malleable:
150 psig - Saturated Stream
300 psig - At 150 Degrees W.O.G.
Cast:
125 psig - Saturated Stream
175 psig - At 150 Degrees W.O.G.
Federal Spec: WW-P-471
U.L.C. and U.L. Listed Where Applicable
FM Approved Where Applicable
|
|
Drainage Fitting Specifications: ANSI B1.20.1, Threads, B16.12, Dimensions, Pressure Rating
ASTM A126, Material. A153, Galvanizing
Federal Spec: WW-P-471
|
|
Cast Iron Flange Specifications: ANSI B1.20.1, Threads, B16.1, Dimensions, Pressure Rating
ASTM A126, Material. A153, Galvanizing
Pressure Ratings:
125 psig - Saturated Stream
175 psig - At 150 Degrees W.O.G. Federal Spec: WW-F-406
U.L.C. and U.L. Listed Where Applicable
FM Approved Where Applicable
|
|
Cast Iron Flange Fitting Specifications: a href="http://www.ansi.org/">ANSI B16.1, Pressure Rating
ASTM A126, Material
Pressure Ratings:
125 psig - Saturated Stream
175 psig - At 150 Degrees W.O.G. Federal Spec: WW-F-406
U.L.C. and U.L. Listed Where Applicable
FM Approved Where Applicable
|
| WARDLOX PLAIN-END FITTING SPECIFICATIONS |
Housing: Cast Iron to ASTM A126 Class A
Set Screws: Carbon Steel, Cadmium Plated, Self-Locking
Gaskets: E.P.D.M. to ASTM D-2000 With Temperature Range of -30 to 230
Threaded Outlets: Conform to ANSI B-1.20.1 Specifications
Pressure Ratings: 175 psig
U.L. Listed, FM Approved
|
| TEE-LOX MECHANICAL BRANCH CONNECTOR SPECIFICATIONS |
Housing: Cast Iron to A126 Class A, Ductile to A536
Gasket: E.P.D.M. to ASTM D-2000
Hole Size: 1 3/16"
U-Bolt: Plated High Tensile Steel
Threaded Outlet: Conform to ANSI/ASME B-1.20.1 Specifications
Run Sizes: 1 1/4", 1 1/2", 2", 2 1/2"
Outlet Sizes: 1/2", 3/4", 1"
Pressure Ratings: 175 psig
U.L. Listed, FM Approved
|